Hanover Facility, Hanover, Pennsylvania
& Market Street Facility, York, Pennsylvania
40 – 50 hrs
Commensurate with experience
1st, 2nd, & 3rd Shifts
Powder Coater Operator
Operate powder coater unit. Cleans metal wire cloth. Applies powder paint finish.
include the following, other duties may be assigned
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Ability to read and write.
Ability to use simple hand tools.
Ability to read a limited number of two and three syllable words and to recognize similarities and differences between words and between series of numbers.
Ability to add and subtract.
Ability to apply common sense understanding to carry out detailed one or two step instructions. Ability to deal with standardized situations with occasional variables.
Employees must wear personal protective equipment (PPE) as required in each production department. Employees are required to follow all safety rules as outlined in the Employee Handbook.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required (2/3 and more of the time) to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee is occasionally required (less than 1/3 of the time) to climb or balance and stoop, kneel, crouch, or crawl.
The employee must occasionally lift and/or move (up to 1/3 of the time) up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
While performing the duties of this job, the employee regularly works (2/3 and more of the time) near moving mechanical parts and is regularly exposed to wet and/or humid conditions, fumes or airborne particles, extreme heat, and vibration.
The noise level in the work environment is moderate.
Must work well with others.
There is a potential of fire (flash) at the powder coating operation. Operators are required to attend regular fire extinguisher training.
Overtime is required as needed.
IWM International is proud to be an Equal Opportunity Employer and a tobacco-free establishment.