Weaving Department Manager
40 – 50 hrs
Commensurate with experience
1st, 2nd, & 3rd Shifts
The purpose of this job is to give looms a thorough cleaning when a warp run is completed and before the next warp run begins, and also transporting wire to be used in the weaving process and hauling away woven mill rolls.
include the following, other duties may be assigned
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Requires ability to read and write and use calculator.
Ability to follow simple instructions.
Required to take annual refresher course in forklift operation.
Ability to read a limited number of two and three syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print.
Ability to add, subtract, multiply and divide with use of calculator.
Ability to apply common sense understanding to carry out simple one or two step instructions. Ability to deal with standardized situations with only occasional or no variables.
Employees must wear personal protective equipment (PPE) as required in each production department. Employees are required to follow all safety rules as outlined in the Employee Handbook.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed (2/3 and more of the time) to fumes or airborne particles. The employee frequently works (1/3 to 2/3 of the time) near moving mechanical parts. The employee is occasionally exposed (less than 1/3 of the time) to toxic or caustic chemicals and risk of electrical shock.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
While performing the duties of this job, the employee regularly works (2/3 and more of the time) near moving mechanical parts and is regularly exposed to fumes or airborne particles. The employee is occasionally exposed (less than 1/3 of the time) to caustic chemicals and risk of electrical shock and vibration.
The noise level in the work environment is usually loud. The noise level makes it nearly impossible for employees to hear a forklift, thus making the forklift operator’s visual contact even more crucial.
Important to have good reflexes and coordination.
Constant awareness to safety for the employee and others in the vicinity.
Employee will get very dirty on this job.
IWM International is proud to be an Equal Opportunity Employer and a tobacco-free establishment.